CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
64
8.6.2. Date: Allows user to setup date. It has the following sub menu.
 Set Date
8.6.2.1. Set Date: Allows user to set date.
 Use or to scroll through to Date.
 Press to access set date sub menu.
 Use or to increment or decrement most significant
digit on date.
 Press to move cursor to next most significant digit.
Repeat above procedure to increment and decrement for
month and year and finally press enter to set Date.
8.6.3. Exit: This is to exit from RTCC submenu.
 Use or to scroll to exit and press to exit.
Date
15/02/2017
Date
15/02/2017
Date
15/02/2017
Date
15/02/2017
Date
16/02/2017
Date
16/02/2017
Date
16/02/2017
Date
16/02/2017
Date
16/02/2017
Date
15/02/2017
Date
15/02/2017
EXIT
Enter to Exit

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English