1. Connect your package detection device to one of the Inputs of your reader.
2. On the Inputs/Outputs pane, check Allow Buffered No-Read Images on the input you connected your reader to.
3. On the Inputs/Outputs pane, click Buffering and Transfer, and in the Image Buffering pane, change What
Results to Buffer under Buffering Settings to All, or No Read.
l In the case of All, good reads are also saved together with No Reads.
l In the case of No Read, the image is buffered if the reader fails to read.
For more information, see the DataMan Fixed-Mount Readers Reference, available through the Windows Start menu
or the DataMan Setup Tool Help menu.
54
Using Your DataMan 360
To Next Page
Loading...
