4.3 Information display
This function allows to indicate the most important labelling parameters on the LCD-display. The pro-
gram number, the actual dispensing speed, the count and the label position on the good are shown
here. It is not possible to change any data. They are only indicated and updated. The arrangement of
the information display is made in the User Menu in the CONFIGURATION menu tree. The ESC la-
bel key terminates this indication mode:
Program 1 RUN
Speed 3.0m/Min
Counter 000000
Position 10.0 mm
4.4 Reset counter
This function allows to reset the counter to zero. ENTER resets the counter.
Counter cleared !
4.5 Preset counter
This function allows to activate and set the preset counter. Entering a value greater than zero activa-
tes the preset counter. After entering return to the counter menu by depressing the ESC key.
ENTER PRESET
Value : 123456
programmer/operator
RUN/STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
5999.530-01E 14.01.2004 CSWM 4 14
To Next Page
Loading...
