6.3 User level
The User Level function is used to define the access authorization of the programming functions
and operating functions. It is distinguished between programmer and user. The programmer is au-
thorized to program and change all parameters and functions of the labeller, but the operator is not
authorized to make use of all functions.
USER LEVEL
Change level
Change Password
If a function or a value is selected by the operator without having the permission for access the follo-
wing warning is displayed:
Warning
Illegal access !
6.3.1 Change level
With the up and down keys it is possible to change the levels. With the ESC key the selection can
be aborted or terminated:
USER LEVEL
Choice : Operator
The difference between the user levels is only active, when a password is acti-
vated. The complete 'USER LEVEL' menu tree does not appear on the display
and is not active, if a key operated switch is installed. In this case the autho-
rization is accessed by the key operated switch.
programmer/operator
STOP
User level:
Operating mode:
5999.530-01E 14.01.2004 CSWM 4 32
To Next Page
Loading...
