6.3.2 Change password
This function allows to enter or change a password. The password serves to distinguish between the
user levels. Enter the password with four digits. It is not indicated as plain text but the figures are
replaced by # characters. If a password is already programmed, this must be entered before ente-
ring a new password.
CHANGE PASSWORD
Password old : ####
When entering a new password, it has to be confirmed once again. Enter the figures '0000' to delete
the password.
CHANGE PASSWORD CHANGE PASSWORD
Password new : #### Confirmation : ####
programmer
STOP
User level:
Operating mode:
5999.530-01E 14.01.2004 CSWM 4 33
To Next Page
Loading...
