Version 1.03 71 Global Scanning UK Ltd © 2017
Maintenance
Cleaning
• Open the scanner.
• Spray 99% isopropyl alcohol onto a lint free cloth.
• Using the cloth, clean the following components:
o Top drive rollers
o Scan glass
o Hold up flap
o Bottom rollers (Rotate rollers by hand to clean all round).
Consumables
• Parts that wear according to operator usage are deemed consumables and can be purchased
from your supplier. Those L24e / L36e scanner parts considered to be consumables are:
o Scan Glass Sub.
o Paper Hold Up flap.
o Calibration/Stitch Target.
To Next Page
Loading...
