ComAp InteliATS NT STD

InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010 13
IA-NT- STD-2.0-Reference Guide.pdf
unication module into the slot of the controller.
7. Put back the small cover.
6. Plug RS 232 comm
NOTE:
When you insert RS 232 communication module, the boot jumper is hidden. For that reason we
recommend to use RS 232 communication module with the boot jumper placed on it. See pictures
below:
RS 232 communication module with the boot jumper.