InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010 56
IA-NT- STD-2.0-Reference Guide.pdf
ta
I /O u v e
Technical Da
nputs utp ts o ervi w
Model IN UT OM COM
Gen
Voltage
Mains
Voltage
B BO C 1 2
.
IA-NT STD 4 (3**) 4 Y* Y* Y Y
NOTE:
* With optional plug-in module
** Hardware version 1.3 provides 3 inputs only
Y -Available
Power supply
Voltage supply 8-36V DC
Consumption 40-430mA depend on supply voltage and
Consumption depends on supply voltage 0,104A at 8VDC
VDC
0,044A at 30VDC
36VDC
p-out: 100ms from min. 10V, return to min. 8V
ent tolerance 2 % at 24V
temperature
0,080A at 12VDC
0,051A at 24
0,040A at
Allowed supply voltage dro
Battery voltage measurem
NOTE:
For the supply voltage less than 7V the backlight of the display is switched off.
Short-term voltage drops (e.g. during the engine cranking) do not affect the operation at all.
Operating conditions
Operat -20..+7
Storage r
ing temperature IA-NT 0
o
C
temperatu e -30..+80
o
C
Humidity 95% without condensation
EN 61010-1:95 +A1:97
Electromagnetic Compatibility EN 50081-1:94, EN 50081-2:96
:99, EN 50082-2:97
- 25 Hz, ±1,6mm
25 - 100 Hz, a = 4 g
Shocks a = 200 m/s
2
Dimensions and weight
Protection front panel IP65
Standard conformity
Low Voltage Directive
EN 50082-1
Vibration 5
Dimensions 180x120x55mm
Weight 450g
To Next Page
Loading...
Need help?
General
