ComAp InteliATS NT STD

InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010 28
IA-NT- STD-2.0-Reference Guide.pdf
Controllers in cascade
Gen Start/StopGen Start/Stop
Load GenreadyToLoadG Toenready
3xU
M
3xU
G
3xI
G
Gen Start/Stop
GenreadyToLoad
Specification
Controllers are suitable for “Cascading” applications allowing load to be split into
The followi ave to be fulfilled:
more sections.
• Automatic remote gen-set start when the mains fails (AUT mode)
• Cascade controlled by Master
• Consequent changeover on slave controllers
• Simple wiring
Hardw re requirements
1 x IA-NT PWR
(1 to n) x IA-NT PWR or STD
ng conditions h
a