InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010 58
IA-NT- STD-2.0-Reference Guide.pdf
IL-NT S-USB interface (optional card)
Plugs into IA-NT controller COMMUNICATION MODULE port.
Maximum Speed Up to 57.6 kBd (DIRECT), 38.4kBd Analog
length.
USB cable.
IB-Lite interface (optional card)
Maximal distance 5m
modem, 9.6 kBd digital modem
Use only shielded A-B USB cables up to 5m
Recommend USB cable:
USB-LINK CABLE 1.8M – ComAp A-B
Plugs into IA-NT controller COMMUNICATION MODULE port.
Interface to Ethernet RJ45 (10baseT)
30..+70
o
C
30..+70
o
C
Operating temperature -
Storage temperature -
IL-NT BIO8 extension module (optional card)
Technical details:
8 plugs into the controller’s EXTENSION MODUL
al can be config ary inputs or outputs.
8
4.7 kΩ
0-36 VDC
ndication (Logical 1) < 0.8 VDC
contact indication (Logical 0) > 2 VDC
voltage level for open contact indication 8-36 VDC
Number of outputs 8
Maximum current per pin 0.5 A
Maximum switching common current 2 A
Maximum switching voltage 36 VDC
IL-NT BIO E port.
8 dedicated pins of the plug-in card’s termin ured as bin
Binary inputs
Number of inputs
e Input resistanc
Input range
Voltage level for close contact i
Voltage level for open
Max
Binary open collector outputs
HINT:
Binary inputs are not galvanically isolated.
To Previous Page
Loading...
