ComAp InteliLite MRS16 User Manual

InteliLite Global Guide
311
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.2.1
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24295 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enter in this setpoint either a valid GSM phone number where the alarm messages shall be sent. For GSM
numbers use either the national format (i.e. the number you would dial if you wanted to make a local call) or
the full international format beginning with a “+” character followed by the country prefix.
IMPORTANT: Telephone number has to be entered without spaces.
Telephone Number 2
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.2.1
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24143 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enter in this setpoint either a valid GSM phone number where the alarm messages shall be sent. For GSM
numbers use either the national format (i.e. the number you would dial if you wanted to make a local call) or
the full international format beginning with a “+” character followed by the country prefix.
IMPORTANT: Telephone number has to be entered without spaces.
Telephone Number 3
6 back to List of setpoints

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English