InteliLite Global Guide
41
4.5 Plug-in module installation
Remove the back cover. To do this, press four holders which are located in corners.
After removing back cover insert the plug-in module. Plug-in module has to be inserted under holders. Start with
holders market by symbol 1. On the controller are also narrows for better navigation. After inserting plug-in
module under holders 1 press it down to holders market by symbol 2 which lock the module.
Insert the plug-in module under holders marked by symbol 1. Then insert the plug-in module under holders
marked by symbol 2.
To Next Page
Loading...
