ComAp InteliLite MRS16 User Manual

InteliLite Global Guide
320
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.2.1
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24310 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint Mode (page 314) (CM-
GPRS module)
Description
Enter an existing email address into this setpoint. This address will be used as sender address in active e-
mails that will be sent from the controller.
Note: It is not needed to enter an existing email address, nevertheless valid email format needs to be
followed.
IMPORTANT: This item is obligatory when emails are configured.
SMTP Sender Address
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS; CM-Ethernet
Related FW 1.2.1
Range [units] GMT-12:00 .. GMT+13:00 [hours]
Default value GMT+1:00 hour Alternative config NO
Step [-]
Comm object 24366 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint is used to select the time zone where the controller is located. See your computer time zone
setting (click on the time indicator located in the rightmost position of the Windows task bar) if you are not
sure about your time zone.
Note: If the time zone is not selected properly the active e-mails may contain incorrect information about
sending time, which may result in confusion when the respective problem actually occurred.
Note: This setpoint is common for CM-Ethernet, CM-GPRS and CM-4G-GPS modules.
Time Zone
6 back to List of setpoints

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English