Combilift Ltd C2500-C3000CB O&S Manual
5-5
C2500CB-OM-EN-11
5.5 Checking the Charge Pressure
In order to check the charge Pressure, the following steps should be taken.
When the reading is taken the charge pressure should measure between 16
bar and 22 bar (230PSI and 320PSI)
Warning
Ensure that the Machine is switched off until the pressure gauge has been
attached before trying to read the charge pressure.
Remove hose connecting
Port G on the pump and
seal with a 9/16“ JIC
Attach pressure gauge to
port G on pump and read
char
e pressure
To Next Page
Loading...
