CombiLift C5000 - Serial Number and Serial Plate

Basic Information
20
C3M2-OM-EN-02
Note
Ensure that the serial number on the chassis corresponds with the serial
number on the serial plate before putting the truck into operation.
2.5 Serial Number and Serial Plate
The truck serial number (A) is stamped on the chassis on the main cross member at
the front right hand side. The serial plate (B) is affixed inside the operator’s cabin
below the operator’s seat.
The serial plate is engraved with the following details:
A. Model: The model type of the truck is engraved in this box.
B. Serial No: The trucks serial number is engraved in this box.
C. Rated Capacity: The trucks maximum rated capacity is engraved in
this box and is given for the load centre engraved in the following box.
D. Load Centre: The distance from the front face of the forks to the centre
of gravity of the load for which the maximum rated capacity is given is
engraved in this box.
E. Unladen Weight: The weight of the truck only is engraved in this box
F. Manufactured On: The date the truck was manufactured on is
engraved in this box
G. The manufacturers name, address and contact details are
displayed on the bottom of serial plate
The serial plate must not be removed. If lost order a replacement from Combilift
immediately.
A
B
C
D
F
E
G
Tel. +353 47 80500 F ax. +353 47 80501
ANNAHAGH, CO. MONAGHAN, IRELAND
Webs i te: www.combilift. com E -mail : i nfo@combilift.com
Kg
mm
Kg
M A N U F A C T U R E D B Y
COMBILIFT LTD.
UNLADEN WEIGHT
MANUFACTURED ON
RATED CAPACITY
MODEL
SERIAL No.
LOAD CENTER
OVERHEAD GUARD
CONFORMS TO THE REQUIREMENTS OF
ASME/ANSI B56.1
X
X
X
X
X
B
A