Operation
70
C3M2-OM-EN-02
Note
If the coolant level drops due to evaporation, add water only.
With the second engine Information screen displayed, press and hold
button (C) for 5 seconds. Standstill DPF regeneration will commence.
The exhaust filter icon and the emissions system temperature warning
icon will be displayed on the MFD screen until the process is complete.
To Abort a Standstill DPF regeneration:
Press button (C) on the MFD with the home screen on the display.
Or
Press button (B) on the MFD with the second engine information screen
on the display.
5.5 Checking Coolant Level
Caution
Switch off the engine before working on the cooling system.
Explosive release of fluids from pressurised cooling system can cause
serious burns.
The engine and cooling system must be cool to the touch before working on
the cooling system.
Only remove the filler cap when cool enough to touch with bare hands.
Slowly loosen the cap to relieve pressure before removing completely.
Coolant is harmful if swallow. Seek immediate medical attention if
swallowed.
Avoid contact with skin and eyes. Wear protective gloves and goggles when
handling coolant.
A
B
C
D
E
F G
ok
AUTO
To Next Page
Loading...
