EasyManua.ls Logo

Comen CM1200B - Page 62

Default Icon
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications
III-3
Lead
Standard 12 leads collect synchronously.
Sampling Mode
Sequential sampling of each group, synchronous
sampling of each group.
Baseline Control
Automatic adjust
A/D Switching
No less than12bits
Measurement Range
5mV
Time Constant
≥5s
Frequency Response
0.05Hz ~ 150Hz (
+0.4dB
-3.0dB
)
Gain
AGC(auto), 2.5 mm/mV, 5 mm/mV, 10 mm/mV, 20
mm/mV, 20/10 (mm/mV), 10/5(mm/mV), totally
seven options, AGC(auto) is defaulted as 10
mm/mV, the error is ±2%.
Input Impedance
≥50MΩ.
Input Circuit Current
≤50nA
Stand Voltage
±650mV
Input Voltage Range
5 mVpp
Calibration Voltage
1mV±1%
Noise Level
≤15
Vp-p
Interference between
Channels
≤0.5mm
Filter:
AC Filter:50Hz/60Hz/off
Drift Filter: 0.05Hz/0.10Hz/0.20Hz/0.50Hz
EMG Filter: 25Hz/35Hz/45Hz/off
Lowpass Filter: 75Hz/100Hz/150Hz/off

Table of Contents