EasyManua.ls Logo

Comen H3 - Loading Record Paper

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Preparation
3-2
battery has been installed which can be used directly. Because of the power loss in
the storage and transportation, for the initial use, the battery power may be
inadequate and at this time the battery should be charged. When the service life of
the battery is expired (cycle life ≥300 times) or the running duration of a fully
charged battery shortens obviously, the battery should be replaced in time. The
detailed instruction of the charging and replacing battery, please refer to section
7.3.1.
3) Connect the Ground Lead
Connect one end of the ground lead to the equipotential grounding terminal at the
back panel of the equipment and connect another end to the public ground lead of
the hospital.
3.2 Loading Record Paper
This equipment adopts 80mm×20mm rolled thermosensitive record paper or
80mm×70mm folded thermosensitive record paper. When the record paper is not
loaded or it is used up, “Paper?” will display in prompt message area to remind the
user of loading or replacing the record paper. When the record paper of a certain
type is used, the paper style should be set the same as the corresponding paper
style.

Related product manuals