System Settings
4-2
Recording mode can not be changed during the course of printing.
Stop printing before changing the recording mode.
Only when [Save Option] is set as “On”, the ECG waveform and
data printed under auto mode can be saved in [File List] screen, or it
can not be saved.
4.3 Manual Mode
Under Manual mode, users can determine which lead to be recorded. Click the
[Lead] hotkey to sequentially switch the leads need to be recorded.
Specific operation steps:
1) Click Auto/ Manual/ Rhythm mode hotkey to switch to Manual mode;
2) Press key to conduct recording, and click the [Lead] hotkey to select
the leads to be recorded;
3) Press key again to stop recording;
The ECG waveform and data will not be saved as patient case under
manual mode.
Under manual mode, only the ECG waveform will be printed without
patient information, measurement information and diagnosis
information
4.4 Rhythm Mode
Under Rhythm mode, 60s ECG waveform of 12 leads will be gathered. When the
[Rhythm Lead Type]is set as [1 Channel],60s ECG waveform of [Rhythm Lead
1]will be recorded. The lead displayed on the screen under rhythm mode is
To Next Page
Loading...
