Cleaning and Maintenance
7-2
Do not allow the liquid to enter the inner of the equipment during
cleaning. Do not immerse the equipment and ECG cable into liquid in
any case.
Do not use abrasive material to clean electrodes.
Wipe off all the residual detergent on the equipment and on the surface
of ECG cable after cleaning.
7.2 Disinfection
In order to avoid permanent damage to the equipment, we suggest you should only
perform the disinfection when necessary according to the regulations of your
hospital; we also suggest that you clean the product first before disinfection.
Do not disinfect the equipment by the way of high temperature,
autoclaving or ionizing radiation.
Do not use chloric disinfectants such as bleaching powder, sodium
hypochlorite etc.
7.3 Maintenance
7.3.1 Charge and Replace Battery
Improper operation may cause the battery being hot, ignition,
explosion or capacity declination. Read this user manual carefully