47
STARTING the CYCLE
From STAND BY, press START to run the cycle shown on the display.
During the cycle, the display will show:
• The current date and time
• The cycle in progress
• The phase of the cycle in progress
• The temperature in the sterilization chamber
• The pressure in the sterilization chamber
• The cycle duration
• The end-phase time (for sterilization and drying phases)
• The “Door locked” indicator
• A “Cooling pause” message, if applicable
• The “Cycle completed” message at the end of the cycle
During the cycle, the multi-function buttons correspond to: STOP/EVENT/INFO/PLOT.
Operation
To Next Page
