4K 8x8 HDBaseT Matrix Switcher
Comm-Tec S.r.l. 17 www.comm-tec.it
Control local device from remote
Note: Send command “%0901.” to enter infrared carrier enforcing mode if the IR
Receiver connected to IR IN of the receiver is not with carrier.
Multiple to Multiple: (IR Matrix)
The 8 “IR OUT” ports and the 8 “IR IN” ports on the far-end receivers make up an
8x8 IR matrix. See as below:
IR Matrix
The 8 IR IN ports correspond with 8 HDMI input ports separately in default mode.
Switching Operation: [x1]R[x2]
x1: Corresponding to the 8 IR OUT ports of the matrix