Comm-Tec MTX88UH2 - GUI for TCP;IP Control

4K 8x8 HDBaseT Matrix Switcher
Comm-Tec S.r.l. 30 www.comm-tec.it
2) After connect successfully, we can enter commands to control the 4K HDBaseT 8x8
Matrix Switcher, as below:
4.4.3 GUI for TCP/IP control
MUH66TPR2-N provides with built-in GUI for convenient TCP/IP control. GUI allows
users to interact with MUH66TPR2-N through graphical icons and visual indicators.
Type 192.168.0.178 in your browser, it will enter the log-in interface shown as below:
Here you will receive the
feedback when a command
is sent.
Enter your command here.
Commands are the same with RS232
commands listed in 4.3.4 RS232
Communication Commands