Comm-Tec MTX88UH2 - Introduction

4K 8x8 HDBaseT Matrix Switcher
Comm-Tec S.r.l. 5 www.comm-tec.it
1. Introduction
1.1 Introduction to the 4K HDBaseT 8x8 Matrix Switcher
4K HDBaseT 8x8 Matrix Switcher is a professional 8x8 HDBaseT Matrix Switcher that
accommodates 8 HDMI IN (HDMI1.4 & HDCP2.2 compliant) & 8 IR IN.
Select HDMI input by front panel buttons, IR, RS232, or GUI. The selected source is
delivered to HDMI Output 1~4 (switched synchronously with HDBaseT output 1~4) &
HDBaseT outputs 1~8 (easy extension to 70m at 1080p and 40m at 4Kx2K on a single
CAT5e/6 connection with HDBaseT receivers, with PoC).
It also features EDID management.
1.2 Features
 8 HDMI Input support HDMI 1.4 &HDCP2.2, and compliant with lower standards,
capable to transmit 4Kx2K@60Hz & 1080p 3D
 Support manual input HDCP auto-detecting and output manual HDCP management
 4 HDMI Output support HDMI1.4& HDCP1.4, transmit 4Kx2K signal for 8m
 8 HDBaseT outputs for easy extension to 70m at 1080p and 40m at 4Kx2K over
single CAT5e/6 cable, support PoC
 LCD screen shows real-time I/O connection status, switching status, HDCP status,
and output resolution.
 Controllable via front panel, TCP/IP, and bi-directional IR& RS232
 Built-in GUI for TCP/IP control
 Powerful EDID management
 Support off memory for reliable operation
 Convenient firmware upgrade through Micro USB port
 Easy installation with rack-mounting design
1.3 Package List
 1 x 4K HDBaseT 8x8 Matrix Switcher
 2 x Mounting ears (6 x Screws)
 1 x RS232 cable
 1 x IR Receiver (5V, with carrier)
 4 x Rubber Feet (4 x Screws)
 1 x IR remote
 1 x Power cord
 16 x Pluggable Terminal Blocks
 1 x User manual
 Confirm if the product and the accessories are all included, if not, please contact
with the dealers.