4K 8x8 HDBaseT Matrix Switcher
Comm-Tec S.r.l. 29 www.comm-tec.it
HDBaseT 8x8 Matrix Switcher.
Follow these steps to connect the devices:
Step1. Connect the TCP/IP port of the 4K HDBaseT 8x8 Matrix Switcher to Ethernet
port of PC with twisted pair.
Step2. Set the PC’s network segment to the same as the 4K HDBaseT 8x8 Matrix
Switcher’s. Do please remember the PC’s original network segment.
Step3. Set the 4K HDBaseT 8x8 Matrix Switcher’s network segment to the same as
the router.
Step4. Set the PC’s network segment to the original ones.
Step5. Connect the 4K HDBaseT 8x8 Matrix Switcher and PC(s) to the router. PC(s)
within the LAN is able to control the 4K HDBaseT 8x8 Matrix Switcher
asynchronously.
4.4.2 Control via TCP/IP communication software
(Exampled by TCPUDP software)
1) Connect a computer and 4K HDBaseT 8x8 Matrix Switcher to the same network.
Open the TCPUDP software (or any other TCP/IP communication software) and
create a connection, enter the IP address and port of 4K HDBaseT 8x8 Matrix
Switcher (default IP: 192.168.0.178, port:4001):
To Next Page
Loading...
