Comm-Tec UP-41TS - User-Defined CEC Command; EDID Tab; EDID Setting

Compact Scaler Switcher
Comm-Tec S.r.l. 21 www.comm-tec.it
6.5.3. User-defined CEC Command
⚫ Select input source or display device, and then type CEC command in the
corresponding Trigger 1 or Trigger 2 box to be sent to control the selected device.
6.6. EDID Tab
6.6.1. EDID Setting
⚫ Select the compatible built-in EDID for the selected input source.