Comm-Tec UP-41TS - CEC Commands

Compact Scaler Switcher
Comm-Tec S.r.l. 32 www.comm-tec.it
Command
Description
Command Example and
Feedback
>SetInputMsgDelayTim
e [Param]
Set the delay time of sending Display Input
Select command.
[Param] = 1 ~ 100 (s) (Default: 3)
<InputMsgDelayTime 10
>GetInputMsgDelayTim
e
Get the delay time of sending Display Input
Select command.
<InputMsgDelayTime 10
>SetDisplayOn [Param]
Power on/off the display device. (Send
RS232 and CEC commands at the same
time). [Param] = EN, Dis
EN - Power on
Dis - Power off
>SetDisplayOn EN
>SetDisplayOn Dis
<DisplayOn True
<DisplayOn False
>SetHdbtPOCOn
[Param]
Enable or disable PoC.
[Param] = EN, Dis
EN - Enable (Default)
Dis - Disable
>SetHdbtPOCOn EN
<HdbtPOCOn True
>GetHdbtPOCOn
Get PoC status.
<HdbtPOCOn True
7.5. CEC Commands
Command
Description
Command Example and
Feedback
>SetCecSrcMenu
[Param]
Send CEC MENU command to source device.
[Param] = 1 ~ 4
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - HDMI 4
>SetCecSrcMenu 1
<CecSrcMenu 1
>SetCecSrcUp [Param]
Send CEC UP command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcUp 1
<CecSrcUp 1
>SetCecSrcDown
[Param]
Send CEC DOWN command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcDown 1
<CecSrcDown 1
>SetCecSrcLeft
[Param]
Send CEC LEFT command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcLeft 1
<CecSrcLeft 1
>SetCecSrcRight
[Param]
Send CEC RIGHT command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcRight 1
<CecSrcRight 1
>SetCecSrcBack
[Param]
Send CEC BACK command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcBack 1
<CecSrcBack1
>SetCecSrcEnter
[Param]
Send CEC ENTER command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcEnter 1
<CecSrcEnter 1
>SetCecSrcOn [Param]
>SetCecSrcOn 1