Comm-Tec UP-41TS - 7.2. Signal Switching Commands

Compact Scaler Switcher
Comm-Tec S.r.l. 26 www.comm-tec.it
Command
Description
Command Example and
Feedback
4 - DP 3
5 - HDMI 4
6 - TYPE-C 4
OutParam = A ~ D(NO
THIS PARAMETER TO
SET TO A)
>GetIpAddress
Get the IP to access GUI.
<IpAddress:
192.168.0.178
<SubNetMask:
255.255.255.0
<GateWay: 192.168.0.1
>SetKeyboardLock
[Param]
Lock/unlock the front panel buttons.
[Param] = EN,Dis
EN - Lock
Dis - Unlock (Default)
>SetKeyboardLock EN
>SetKeyboardLock Dis
<KeyboardLock True
<KeyboardLock False
>GetKeyboardLock
Get the front buttons locking status.
<KeyboardLock True
>SetPowerOn [Param]
Enter/exit standby mode
[Param] = EN,Dis
EN - Exit standby (Default)
Dis – Enter standby
>SetPowerOn EN
>SetPowerOn Dis
<PowerOn True
<PowerOn False
>GetPowerOn
Get the system standby status.
<PowerOn True
>GetStatus
Get the system status.
<V1.0.0
<Video
OUT A B C D
IN 1 2 3 5
<AudioSource 1
<OutputResolution 8
… …
7.2. Signal Switching Commands
Command
Description
Command Example and
Feedback
>SetAV
[InParam],[OutParam]
Switch input source to output window.
[InParam] = 1 ~ 6
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
>SetAV 3
>SetAV 1,A