Compact Scaler Switcher
Comm-Tec S.r.l. 24 www.comm-tec.it
6.10. Additional Tab
⚫ Set the baud rate of switcher and restore the switcher to factory default setting.
6.11. GUI Upgrade
Please visit at http://192.168.0.178:100 for GUI online upgrade.
Type the username and password (the same as the GUI log-in setting, modified password
will be available only after rebooting) to login the configuration interface. After that, click
“Administration” in the source menu to get to “Upload Firmware” as shown below:
Select the desired update file and press “Apply”, it will start upgrading then.
Note: Please don’t do anything during the upgrade process to avoid upgrade failure.
To Next Page
Loading...
