Comm-Tec UP-41TS - 7.3. Audio Setting Commands

Compact Scaler Switcher
Comm-Tec S.r.l. 27 www.comm-tec.it
Command
Description
Command Example and
Feedback
4 - DP 3
5 - HDMI 4
6 - USB-C 4
[OutParam] = A ~ D (No this parameter
when switching input source to window A)
<AV 3,A
<AV 1,A
>GetAV [OutParam]
Get the input source of window [OutParam].
[OutParam] = A~D (No this parameter when
get input sources of all windows)
>GetAV
>GetAV A
<Video
OUT A B C D
IN 1 2 3 4
<AudioSource 1
<Video 1，A
>SetAutoSwitch
[Param]
Enable/disable auto switching mode.
[Param] = EN,Dis
EN - Enable (Default)
Dis - Disable
>SetAutoSwitch EN
>SetAutoSwitch Dis
<AutoSwitch True
<AutoSwitch False
>GetAutoSwitch
Get the auto switching status.
<AutoSwitch True
>SetInput3Type
[Param]
Select the input source for the third input
channel. [Param] = H,Dp
H - HDMI input
Dp - DP input
>SetInput3Type H
<Input3Type H
>GetInput3Type
Get the input source of the third input
channel.
<Input3Type H
>SetInput4Type
Select the input source for the fourth input
channel. [Param] = H, C
H - HDMI input
C – USB-C input
>SetInput4Type H
<Input4Type H
>GetInput4Type
Get the input source for the fourth input
channel.
<Input4Type H
7.3. Audio Setting Commands
Command
Description
Command Example and
Feedback
>SetMicAudioMute
[Param]
Mute/Unmute microphone audio.
[Param] = EN, Dis
EN - Mute.
Dis - Unmute (Default)
>SetMicAudioMute EN
>SetMicAudioMute Dis
<MicAudioMute True
<MicAudioMute False
>GetMicAudioMute
Get the microphone audio mute status
<MicAudioMute False
>SetMicVOL [Param]
Set the microphone audio volume to [Param].
[Param] = 0~60 (Default: 60)
>SetMicVOL 6
<MicVOL 6
>GetMicVOL
Get the microphone audio volume.
<MicVOL 6