Comm-Tec UP-41TS - Page 33

Compact Scaler Switcher
Comm-Tec S.r.l. 33 www.comm-tec.it
Command
Description
Command Example and
Feedback
Send CEC ON command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
<CecSrcOn 1
>SetCecSrcOff [Param]
Send CEC OFF command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcOff 1
<CecSrcOff 1
>SetCecSrcStop
[Param]
Send CEC STOP command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcStop 1
<CecSrcStop 1
>SetCecSrcPlay
[Param]
Send CEC PLAY command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcPlay 1
<CecSrcPlay 1
>SetCecSrcPause
[Param]
Send CEC PAUSE command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcPause 1
<CecSrcPause 1
>SetCecSrcPrev
[Param]
Send CEC PREV command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcPrev 1
<CecSrcPrev 1
>SetCecSrcNext
[Param]
Send CEC NEXT command to source device.
[Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcNext 1
<CecSrcNext 1
>SetCecSrcRewind
[Param]
Send CEC REWIND command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcRewind 1
<CecSrcRewind 1
>SetCecSrcFastForwar
d [Param]
Send CEC Fast-forward command to source
device. [Param] = 1 ~ 4 (HDMI 1~4)
>SetCecSrcFastForward 1
<CecSrcFastForward 1
>SetCecDisplayOn
[Param]
Send CEC ON command to display device.
[Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplayOn 1
<CecDisplayOn 1
>SetCecDisplayOff
[Param]
Send CEC OFF command to display device.
[Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplayOff 1
<CecDisplayOff 1
>SetCecDisplaySource
[Param]
Send CEC SOURCE command to display
device. [Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplaySource 1
<CecDisplaySource 1
>SetCecDisplayMute
[Param]
Send CEC MUTE command to display device.
[Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplayMute 1
<CecDisplayMute 1
>SetCecDisplayVol+
[Param]
Send CEC VOLUME UP command to display
device.
[Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplayVol+ 1
<CecDisplayVol+ 1
>SetCecDisplayVol-
[Param]
Send CEC VOLUME DOWN command to
display device.
[Param] = 1 ~ 2 (1 - HDMI, 2 - HDBT)
>SetCecDisplayVol- 1
<CecDisplayVol- 1