Comm-Tec UP-41TS - Page 29

Compact Scaler Switcher
Comm-Tec S.r.l. 29 www.comm-tec.it
Command
Description
Command Example and
Feedback
4 - 19200
5 - 9600 (Default)
>GetRS232Baudrate
Get the baud rate of RS232 port.
<RS232Baudrate 5
>SetOutputResolution
[Param]
Set the output resolution to [Param].
[Param] = 1 ~ 8
1 - 1024x768@60Hz
2 - 1280x720@60Hz
3 - 1360x768@60Hz
4 - 1600x1200@60Hz
5 - 1920x1080@60Hz
6 - 1920x1200@60Hz
7 - 3840x2160@30Hz (Default)
8 - AUTO
>SetOutputResolution 4
<OutputResolution 4
>GetOutputResolution
Get the output resolution.
<OutputResolution 4
>GetInputResolution
[Param]
Get the input resolution. [Param] = 1~4.
1 - HDMI 1
2 - HDMI 2
3 - HDMI/DP 3
4 - HDMI/USB-C 4
>GetInputResolution 1
<InputResolution: 1
1920x1080 60Hz
>SetHdcpHdmiOutput
[Param]
Set the HDCP mode of output port
[Param] = 1 ~ 3
1 - HDCP 1.4 (Default)
2 - HDCP 2.2
3 - OFF
>SetHdcpHdmiOutput 1
<HdcpHdmiOutput 1
>GetHdcpHdmiOutput
Get the HDCP mode of output port.
<HdcpHdmiOutput 1
>SetInPortEdid
[Param1],[Param2]
Set the EDID of input soure.
[Param1] = 1 ~ 6
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - DP 3
5 - HDMI 4
6 - USB-C 4
[Param2] = 1 ~ 5
1 - 1920x1080 60HZ PCM 2CH
2 - 3840x2160 30HZ PCM 2CH (Default)
3 - BYPASS HDMI
4 - BYPASS HDBT
5 - USER
>SetInPortEdid 1,1
<InPortEdid 1,1