Comm-Tec UP-41TS - Page 35

Compact Scaler Switcher
Comm-Tec S.r.l. 35 www.comm-tec.it
Command
Description
Command Example and
Feedback
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XX XX= HEX data to be sent (X = 0~9, A~F
and up to 20 XX).
<Baudrate: 9600
<Power on to send HEX:30
31 32 33
>SetSleepSendChar_[P
aram]:XXXX
Set the ASCII “Power Off” command "XXXX"
to be sent to display device when the
switcher enter standby mode.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XXXX= ASCII data to be sent (Up to 48
characters).
>SetSleepSendChar_5:AB
CDEFG
<Baudrate: 9600
<Enter sleep to
send:ABCDEFG
>SetSleepSendHex_[Pa
ram]:XX XX
Set the HEX “Power Off” command "XX XX"
to be sent to display device when the
switcher enter standby mode.
[Param] = 1~5 (Baud rate of RS232 port)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
XX XX= HEX data to be sent (X = 0~9, A~F
and up to 20 XX).
>SetSleepSendHex_5:41
42 43 44
<Baudrate: 9600
<Enter sleep to send
HEX:41 42 43 44