Commodore PC 40 - How to Quit

20 Operations Guide
What's next?
How To Quit
There is no Quit command in MS-DOS, but ending your MS-DOS
session is easy. Follow these steps:
1. MAKE SURE THAT YOUR LAST COMMAND HAS FINISHED
PROCESSING.
You should see the MS-DOS prompt (A» on the screen.
2. TAKE OUT ANY FLOPPY DISKS THAT ARE IN THE DRIVES.
Make sure to put these disks back in their protective jackets and
store them in a safe place.
3; TURN OFF YOUR COMPUTER.
4. TURN OFF YOUR MONITOR.
That's all
there is to it.
You have now completed reading the main text of the Commodore
PC Operations Guide. The Appendices to the Operations Guide
come next in this volume. These appendices are followed by the
MS-DOS User's Guide, which introduces you to the basic elements
of MS-DOS. If you are using your Commodore PC only to run
prepackaged software, the Operations Guide and the User's Guide
give
you all the information you need. If you plan to create your
own programs, refer to the MS-DOS User's Reference (also bound in
this
volume) and the GW BASIC Interpreter User's Guide (bound
separately) for detailed technical information.
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[