Comnet CNGE2FE8MSPOE - MAC Address Table; Static MAC Address

110
6.26 MAC Address Table
Use the MAC address table to ensure the port security.
6.26.1 Static MAC Address
You can add a static MAC address that remains in the switch's address table regardless of
whether the device is physically connected to the switch. This saves the switch from having
to re-learn a device's MAC address when the disconnected or powered-off device is active
on the network again. Via this interface, you can add / modify / delete a static MAC address.
Add the Static MAC Address
You can add static MAC address in the switch MAC table here.
 MAC Address: Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
 Port No.: Pull down the selection menu to select the port number.
 Click .
 If you want to delete the MAC address from filtering table, select the MAC address and
click .