Comnet CNGE2FE8MSPOE - Systemlog, SMTP and Event Commands Set

149
backup
flash:backup_cfg
G
Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
Switch(config)#backup
flash:backup_cfg
restore
flash:restore_cfg
G
Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
Switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G
Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
Switch(config)#upgrade
flash:upgrade_fw
SystemLog, SMTP and Event Commands Set
Netstar Commands
Level
Description
Example
systemlog ip
[IP address]
G
Set System log server
IP address.
Switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G
Specified the log
mode
switch(config)# systemlog mode
both
show systemlog
E
Displays system log.
Switch>show systemlog
show systemlog
P
Show system log
client & server
information
switch#show systemlog
no systemlog
G
Disable systemlog
functon
switch(config)#no systemlog
smtp enable
G
Enable SMTP function
switch(config)#smtp enable
smtp serverip
G
Configure SMTP
switch(config)#smtp serverip