36
6.4 System Information
User can assign the system name, description, location and contact personnel to identify
the switch. The version table below is a read-only field to show the basic information of the
switch.
System Name: Assign the system name of the switch (The maximum length is 64
bytes)
System Description: Describes the switch.
System Location: Assign the switch physical location (The maximum length is 64
bytes).
System Contact: Enter the name of contact person or organization.
Firmware Version: Displays the switch’s firmware version
Kernel Version: Displays the kernel software version
MAC Address: Displays the unique hardware address assigned by manufacturer
(default)
And then, click .
Switch settings interface
To Next Page
Loading...
