40
6.6.1 System configuration
DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will
be the DHCP server on your local network.
Low IP Address: Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between 192.168.10.100
~ 192.168.10.200. In contrast, 192.168.10.100 is the Low IP address.
High IP Address: Type in an IP address. High IP address is the end of the dynamic
IP range. For example, dynamic IP is in the range between 192.168.10.100 ~
192.168.10.200. In contrast, 192.168.10.200 is the High IP address.
Subnet Mask: Type in the subnet mask of the IP configuration.
Gateway: Type in the IP address of the gateway in your network.
DNS: Type in the Domain Name Server IP Address in your network.
Lease Time (sec): It is the time period that system will reset the dynamic IP
assignment to ensure the dynamic IP will not been occupied for a long time or the
server doesn’t know that the dynamic IP is idle.
And then, click .
DHCP Server Configuration interface
To Next Page
Loading...
