56
Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
minute between 0 and 720, which means you can set the offset up to 12 hours.
Synchronization Interval (secs): The Synchronization Interval is used for sending
synchronizing packets periodically. User can assign range from 64s to 1024s. The
default setting of values is “0” means that you disable the auto synchronizes feature in
SNTP client mode. You can enable the feature when filling the interval range from
64s~1024s.
Click to have the configuration take effect.
SNTP Configuration interface
To Next Page
Loading...
