JHT01 Service Manual
2-26
12.4.1 Kill switch relationship with Wireless LAN and Bluetooth
The following is two state of kill switch
1. Kill switch On:
When users press Fn+F2, AP will be showed. At this time, User can turn
on/off which Wireless LAN and Bluetooth.
If the devices just only have one whatever Wireless LAN or Bluetooth, the
AP won’t be showed anything.
2. Kill switch Off:
In this status, when user pressed Fn+F2, AP will be showed user that can not
turn on Wireless LAN and Bluetooth.
If the devices just only have one whatever Wireless LAN or Bluetooth, the
AP won’t be showed anything.
12.5 External Buttons status report and control
12.5.1 Power Switch (Push button)
If system is Off/S2D: System will be turned on while Power switch is depressed
by more than 500 ms with or without AC insert
•
If system is in S2R/Standby state: System will resume while Power switch is
depressed by more than 100 ms
12.5.2 Mail Button (No Support)
• Open outlook or express AP.
12.5.3 Internet Button (No Support)
• Open Internet explorer AP.
12.5.4 User defined Button (No Support)
•
User can defined which function they want to use.
12.5.5 Program Button (No Support)
•
User can defined which AP they want to use.
12.5.6 WOW Audio Button (Just support in high-end platform)
• Open WOW Audio’s AP.
12.5.7 WOW Video Button (Just support in high-end platform)
• Open WOW Video’s AP.
12.5.8 Smart Key Button
• Open Smart Key’s AP.
To Next Page
Loading...
