Managing Power 4-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 04/27/00 5:38 PM
Part Number: 170045-002 File name: Ch04
If the computer will be disconnected from external power for
more than two weeks—To extend the useful life of the battery
pack, shut down the computer, then remove the battery pack and
store it in a cool, dry place.
If you plan to resume within two weeks—Initiating Hibernation
clears the screen, saves your work to the hard drive, and uses less
power than Suspend (Standby). Returning to work saved in
Hibernation takes a little longer than returning to work placed in
Suspend (Standby), but is much faster than returning to your place
manually after restarting the computer. A fully charged battery
pack supports Hibernation indefinitely.
Using Standby (Suspend) and Hibernation
Task Procedure Result
Turn the
computer
on from
shutdown
Slide power switch. Power/suspend* light turns on.
Operating system loads.
Shut down
the
computer
Shut down the
computer.
Power/suspend* light turns off.
Operating system closes and
turns off all power.
Computer turns off.
Initiate
Suspend*
â– Press suspend
button.**
or
â– Select Stand by
(Windows 98 and
Windows 2000
Professional) on the
shutdown menu.
Power/suspend* light blinks.
System beeps twice.
Screen clears.
*In Windows 98 and Windows 2000 Professional the term Standby
replaces the term Suspend.
**In Windows 98 and Windows 2000 Professional the term sleep button
replaces the term suspend button.
Continued