4-6
Compro IP55 / 60 / 70 Network Camera
Accessing via 3GPP Mobile Phone
You can access your IP camera via 3GPP-compatible mobile phones when the IP camera has a stable internet
connection and the mobile device has a good connection on GPRS or to 3G network. There are several
prerequisites which need to be met before using the 3GPP function successfully.
1. User should turn on the 2nd stream of the IP camera and set the resolution as QQVGA, FPS as 5, codec
as MPEG-4 and set a medium bit rate for Quality. In addition, after enabling the 2nd stream, you will
notice a drop in the frame rate for the primary stream. This is a normal behavior since the camera
system has to process two streams instead of just one.
2. User needs to enable DDNS function and obtain a valid Dynamic DNS (DDNS) address as detailed in
earlier sections of this manual.
3. Ensure that an active internet connection is available for both the IP camera and the intended mobile
phone.
Having taken above actions, enter the following address into the address eld of your mobile web browser
orstreamingsoftwareinordertoviewtheliveimage:“rtsp://ipcamera-ip/medias2”(the“ipcamera-ip”isthe
DDNS address that you’ve obtained in the installation process).
Note:
Compro Technology does not guarantee the successful
viewing of live video on every 3GPP-compatible
cell phone. You may also need to consult with the
mobile network service provider about the usage and
availability of 3GPP format.
Accessing via 3GPP Mobile Phone
To Next Page
Loading...
