g. Setting the Item7 (Break1 End)
Example: end time for break1 is set at 10:15.
23
(a) Setting the “Item”
Press the [F] button, and position
the “▲” under the “COMMON
SCHEDULE” mark. The “Item”
flashes (The flashing means it
can be changed).
F
+
E
Item7:
Break1 End
Hour
Minute
COMMON
SCHEDULE
Press the [+] or [-] button to set at
“07” and press [E] button. At the
same time, the flashing changes
from “Item7” to “Hour”.
(b) Setting the “Hour”
Press the [+] or [-] button to set at
“10” and press [E] button. At the
same time, the flashing changes
from “Hour” to “Minute”.
F
+
E
COMMON
SCHEDULE
(c) Setting the “Minute”
Press the [+] or [-] button to set
at “15” and press [E] button.
F
+
E
COMMON
SCHEDULE
Such as example, the flashing
changes from “Hour” to “Item8”.
F
+
E
COMMON
SCHEDULE
*The settings for break2 start
time, break2 end time, break3
start time and break3 end time
are the same as break1 start
time and break1 end times
settings.
TO PLACE AN ORDER CALL: 866-487-4751
OR VISIT: WWW.TIMECLOCKEXPERTS.COM
To Next Page
Loading...
