10. SETTING THE TIME OF DAY CHANGE
The time of day change refers to the time when the print shift to the next line on a
time card for the next day. This function allows the time recorder to imprint the
punch out time on the same line of previous working day, even if leaving time is
after midnight.
*If you try to change the setting, make sure the time recorder has no punch
recorded, otherwise the error code “E-49” will appeared. You must make all
card resetting or reset all (Please refer card resetting and reset).
Example: The time of day change is pre-set on 05:00. Proceed to change the time
of day change to be 02:00.
15
(1) Press the [F] button, and position
the “▲” under the “DAY
CHANGE” mark. The “Hour”
flashes. (The flashing means it
can be changed).
F
+
E
DAY
CHANGE
Hour
Minute
(2) SETTING THE “HOUR”
Press the [+] or [-] button to set at
“02” and press [E] button. At the
same time, the flashing changes
from “Hour” to “Minute”.
F
+
E
DAY
CHANGE
(3) SETTING THE ‘MINUTE”
Such as example, press the [E]
button because the “Minute” 00
is not to be changed.
At the same time, the LCD
screen only display “▲” under
the “DAY CHANGE” mark.
F
+
E
DAY
CHANGE
(4) If you want to set another
function, press the [F] button to
continue setting.
If you finished setting the
functions, replace the cover and
lock it.
TO PLACE AN ORDER CALL: 866-487-4751
OR VISIT: WWW.TIMECLOCKEXPERTS.COM
To Next Page
Loading...
