Contents XPS/XPS-E User's Manual
8 COMSOFT
2.4.1 GSD File
Next to standard parameters the parameters for the serial interface are included
in the GSD file. They are listed under the
User_Prm_Data. The values
correspond to those described under chapter 2.3. A modification of these
parameters can be made by any kind of ASCII editor. Please note that the
number of parameters must not be changed and that the first four and last six
parameter bytes are to be set to 0.
In the following, the default settings of the GSD for serial interfaces of
XPS/XPS-E are listed.
9600 Baud / 8Bit / No Parity / 1 Stopbit / no Handshake / no Timeout / Poll-
Mode / RS232-Mode
This corresponds to the following entry in the GSD file:
User_Prm_Data = 0 0 0 0 96 56 78 0 80 0 0 0 0 0 0 0
To Next Page
Loading...
General