Comsoft XPS - Technical Data

XPS/XPS-E User's Manual Contents
 COMSOFT 33
7 Technical Data
7.1 XPS
7.1.1 PROFIBUS-DP Interface
Transmission protocol: PROFIBUS-DP according to EN50170-3
Slave coupler
Transmission rates: 9.6Kbit/s , 19.2Kbit/s, 93.75Kbit/s, 187.5Kbit/s,
500Kbit/s, 1.5Mbit/s, 3Mbit/s
automatic adjustment
Potential segregation: Opto-coupler interface and DC/DC transducer
Isolation voltage U>500V
Terminating resistor: TYP A, to be activated via slide switch
Operating modes:
Sync_Req and Freeze_Req are not
supported.
Addresses: 1 - 99 by encoding switch
Identification Number: 0x9510
Parameterisation Data: 23 Byte (16 Byte User Parameter)
Diagnostics information: 6 Byte System diagnostics acc. to standard
8 Byte device-specific diagnostics
Data_Exchange Buffer: 4 - 240 Byte I/O arbitrarily selectable (3 Byte
with Header functionality).
PNO certified: Z00284