Comsoft XPS - Trigger Character for Serial Triggert Mode

XPS/XPS-E User's Manual Contents
 COMSOFT 13
2.4.3.7 Trigger character for Serial triggert mode
Here the trigger character for the serial triggerd mode is set. If the seriell
receive data stream contains the same sign, all received data up to this
character are sent to the DP-Master inclusive the trigger character.
Triggerzeichen Wert (dez) Wert
(hex)
Wert
(ASCII)
LF * 10 0x0A LF
Table 8: Triggerzeichen Octett 18