Comsoft XPS - Xps-E

Contents XPS/XPS-E User's Manual
36  COMSOFT
7.2 XPS-E
7.2.1 PROFIBUS-DP Interface
Transmission protocol: PROFIBUS-DP acc. to EN50170-3
Slave coupler
Transmission rates: 9.6kbit/s, 19.2kbit/s, 93.75kbit/s, 187.5kbit/s,
500kbit/s, 1.5Mbit/s, 3Mbit/s, 6Mbit/s, 12Mbit/s
automatic adjustment
Potential segregation: Opto-coupler interface and DC/DC transducer
Isolation voltage U>500V
Operating modes:
Sync_Req and Freeze_Req are not
supported.
Addressing: 1 - 99 by coding switch
Identification number: 0x9510
Parameterisation data: 23 Byte (16 Byte user parameters)
Diagnostics information: 6 Byte system diagnostics acc. to standard
8 Byte device-specific diagnostics
Data_Exchange Buffer: 4 - 240 Byte I/O selectable (3 Bytes with header
functionality).