Comsoft XPS - Figure 8: Byte Definition of External Device Diagnostics; 4 Status and Error Messages

XPS/XPS-E User's Manual Contents
 COMSOFT 23
4 Status and Error Messages
4.1 External Device Diagnostics
External device diagnostics can be realised by means of the service
slave_diag Octet 8 of the response telegram contains the device status and
is encoded as follows:
70
xxxxx
RS_PORT_CFG_ERROR
Invalid parameter at
p
arameterisation of serial interface.
xx
not significant
Octet 8
Figure 8: Byte Definition of external Device Diagnostics