XPS/XPS-E User's Manual Contents
COMSOFT 37
7.2.2 Serial Interface
Interface: RS232 interface with Handshake signals (RTS,
CTS).
RS422/485 interface with Handshake signals
(CONTROL, INDICATION).
Interface physics can be adjusted via PROFIBUS
by means of User_Parameter.
Transmission rates: 150bit/s, 300bit/s, 600bit/s, 1.200bit/s, 2.400bit/s,
4.800bit/s, 9.600bit/s, 19.200bit/s
Character transmission: 8N1, 7N2, 7E1, 7O1
Handshake: HW (RTS/CTS, CONTROL/INDICATION),
SW(XON/XOFF), none
XOFF Timeout: adjustable to max. 25,5 seconds
Data transmission modes: Poll mode, Request mode, serial triggered mode
Receive buffer 2 KByte
Potential segregation: optional
7.2.3 Connection
Power supply: 2-pin spring clip
2,5mm
2
without ferrule
1,5mm
2
with ferrule
PROFIBUS-DP: 9-pin female D-SUB (DIN 41652)
RS-PORT: 9-pin male D-SUB (DIN 41652)
7.2.4 Operating Indicators and Controls
PROFIBUS Status LEDs: “green” means RUN
“red” means BUSFAIL
RS-PORT Status LED: RxD “red” corresponds to: data will be received
TxD “red“ corresponds to: data will be sent
Hardware physics “red” corresponds to: RS232
mode
PROFIBUS address: window at coding switch
To Next Page
Loading...
General